EN
Open Studio
GridGarden Studio
Slope and terraces

Sloped garden: terraces and retaining walls in wood

Split a slope into level terraces held by GridGarden walls — with steps and raised beds from one system. Pick a ready-made cascade and adjust it with sliders; we count the parts and the price exactly.

120 mm
height of one layer of parts
30–54 cm
height of a step made from a bed
60 mm
solid larch, no chemicals

Updated 20/11/2026

How a cascade is put together

A cross-section through one cascade — these are the sizes you set with the sliders.

  • LevelsWe split the height drop into walls of up to 120 cm; a higher slope gets more levels. Each wall can have its own height and length.
  • StepsEvery step is 18 cm high. You choose the width and the tread depth, we count the number of steps.
  • Step sidesThe side walls of the steps hold the soil and can rise above the terrace like a low parapet.
  • Raised bedsIn front of a wall or on top of it — you choose the bed depth and the number of layers.
  • SupportsTaller walls get supporting walls into the slope automatically, so the wall does not lean out.

Three ways to shore up a slope

Each one holds the soil differently. For a garden by the house, terraces you can plant straight into are often enough.

Three ways to shore up a slope
SolutionMade fromHow it's builtWhen it suits
Terraces from raised bedslarch parts 60 mm, joined with snap-in connectorslayer by layer, no screws or drilling, step = beda gentle slope by the house, vegetables, herbs and flowers
Palisade postswooden or concrete postsset vertically into the ground, often in concreteedging a path or bed, a small height difference
Gabionswire cages filled with stonethe cages are set on a prepared base and filled with stonea bigger height drop and access for machinery

A retaining wall holding back a slope above a house, road or footpath needs a structural engineer. The calculator on this page works out steps made from beds, not the wall's structural design.

How many steps you need

Number of steps = height drop ÷ step height, rounded up. Step depth = horizontal slope length ÷ number of steps. Step height is the bed height: each layer of parts adds 120 mm.

Example for a slope 6 m long horizontally: number of steps × depth of one step
Height dropSteps of 30 cmSteps of 42 cmSteps of 54 cm
60 cm2 × 3 m2 × 3 m2 × 3 m
90 cm3 × 2 m3 × 2 m2 × 3 m
120 cm4 × 1.5 m3 × 2 m3 × 2 m
150 cm5 × 1.2 m4 × 1.5 m3 × 2 m

Step calculator

Number of steps–

Depth of one step–

Slope gradient–

Design terraces in Studio

What one step costs

The simplest cascade is a row of separate beds, each one step lower. One step as a 2.4 × 0.9 m bed with a height of 42 cm costs €500.24. Studio works out the whole cascade with stairs at every change.

Bed price including VAT, excluding shipping, measured in Studio 6/10/2026. Valid for the delivery country: Germany – you can change it in the page footer.

Terraced Brick Premium raised beds on a slope, each step is a bedvisualisation

Stairs between steps

You build garden stairs from the same parts, so the steps, stairs and wall share one material and one wood colour.

Stairs in the shop

Frequently asked questions

How tall can one wall be?

The configurator offers walls of up to 120 cm; a higher slope is split into more levels. For a wall next to a house, road or neighbour we recommend an expert assessment.

What is included in the price?

All GridGarden parts of the design. Soil, gravel, drainage, anchors and groundwork are not included.

Can I fit a cascade to my own plot?

Yes — in Studio you mark the slope and the cascade adapts to the measured gradient.

Can I extend a cascade later?

Yes, the system is modular — you can add another level or a longer wall from the same parts.

Can you build a raised bed straight onto a slope?

A bed needs a level base. Under each step you'll level the slope: take soil from the top and use it to fill the beds.

How tall can one step be?

The calculator works with the heights of ready-made beds 30 cm, 42 cm and 54 cm. In Studio you can also set a different number of layers, each one adding 120 mm.

When do I need a structural engineer?

When a wall holds back a slope above a house, road or footpath, or when the slope is high and steep. Terraces made from beds in a typical garden are a different job to a retaining wall.

How much does a sloped garden cost?

It depends on the number and length of steps. One step as a 2.4 × 0.9 m bed costs €500.24. You'll see the exact price of the whole cascade in Studio.

GridGarden Studio

Start designing for free