🇺🇸 US store · Switch to Europe →

EN
SKSlovenčinaENEnglishCSČeštinaDEDeutschFRFrançaisHUMagyarITItalianoNLNederlandsPLPolskiRORomână
Open Studio
GridGarden Studio
Sign in / Account
EN
SKSlovenčinaENEnglishCSČeštinaDEDeutschFRFrançaisHUMagyarITItalianoNLNederlandsPLPolskiRORomână

All 12 products · Brick Premium

Go to the shop
Raised garden bed I – solid 2⅜ in European larchRaised garden bed IRaised garden bedsRaised garden bed L – solid 2⅜ in European larchRaised garden bed LRaised garden bedsRaised garden bed U – solid 2⅜ in European larchRaised garden bed URaised garden bedsBed I with bench – solid 2⅜ in European larchBed I with benchRaised garden bedsBed L with bench – solid 2⅜ in European larchBed L with benchRaised garden bedsSolid bench – solid 2⅜ in European larchSolid benchSeatingPedestal bench – solid 2⅜ in European larchPedestal benchSeatingBench with planter – solid 2⅜ in European larchBench with planterSeatingGarden table – solid 2⅜ in European larchGarden tableSeatingTable and two benches – solid 2⅜ in European larchTable and two benchesSeatingSandbox with seating – solid 2⅜ in European larchSandbox with seatingFor kidsGarden steps – solid 2⅜ in European larchGarden stepsSlope & terrace

By project

Brick Premium bedsSeatingKids’ cornerSlope & terraceCustom-size bedLow wall & slopeBed for the patio
Plants and planting

Lawn irrigation. Done in a minute.

Enter your lawn and your water. We lay out Hunter sprinklers and give you a shopping list.

The calculator needs JavaScript. The calculation rules are described further down this page.

How we calculate

  • Heads stand head-to-head: the spacing equals the throw. On a rectangle the corners are set to 90°, the edges to 180° and the inside to 360°. On an L shape and a drawn shape head-to-head is not guaranteed.
  • A zone draws at most 70 % of the source flow, and the controller is chosen by the number of zones. Water pressure is always an estimate, and we subtract a reserve of 15 psi from it.
  • Nozzles, bodies, valves and controllers come from the irrigation register in Studio (Hunter MP Rotator at 41 psi).
  • We may shorten the throw by at most 25 %, and the pipe length is an estimate. Slopes, buildings and paving are for Studio only.

Drip hose rows run along the longer side of the bed, the first row sits close to the frame and the row spacing depends on the soil. Beds are grouped into zones by the flow of your water source. The rules come from the irrigation register in Studio, which relies on manufacturer tables (Rain Bird, Hunter).

You enter the source flow. A zone draws at most 70 % of it. Hose reserve of 10 % for bends and trimming. Between beds we count 1 ft 11⅝ in of pipe and 2 connections per row.

Irrigation questions

Why did I get more zones?

Heads are watered in groups so that a zone never draws more than your water source can supply. A stronger source means fewer zones.

Is the result exact?

It is an estimate for shopping. Studio checks the slope, buildings, paving, pressure and pipe route and produces a plan with a shopping list.

Why can sprinklers and drip hose not share a zone?

They need a different pressure and a different flow. Drip hose needs low pressure from a regulator, sprinklers need more. So each type gets its own zone.

Do you sell irrigation too?

No. We sell Brick Premium raised garden beds. You can buy irrigation in any garden shop.

Slope, buildings, paving, a pump?Studio lays out heads and pipes exactly and produces a plan for the installer.
Exactly, with slope and buildings, in Studio

Updated 10/31/2026